MTP Transport Infusion Pump without case

SKU
304-1001A
$3,585.00
-
+
Overview
For durability and reliable performance in all types of inside or outside environments, the MTP is manufactured utilizing U.S. Military Standards for workmanship and electronic component selection. The MTP's minimal electronic controls (switches) provides quick, simple and user friendly pump set up and operation. Regardless of the operational environment's ambient light, the pump will brightly display all pump modes and alarm messages. The pump will operate for up to 8 hours on its rechargeable battery, and for added operational flexibility, it may be powered (while recharging its battery) from either an AC electrical power source or from a vehicle's DC electrical power source. The DC electrical power source must be 12 volts or greater. The MTP is registered with the United States Food and Drug Administration (FDA) as a transport infusion pump. This is a plus for your risk management program for your malpractice insurance. The MTP models (1001) and (1001a) meet U.S. Military Standards 461 (c) and (d) and 810 while under battery operation. The MTP is used by the U.S. Navy in Operation Deep Freeze, and it was also used in Operation Dessert Storm, and both the MTP and MVP-1 were used in Operation Provide Promise in Croatia and Bosnia. Important Features: The MTP will effectively operate in any position, even when it is at the same level as the solution container. All of the MTP's functions and alarms are controlled by a powerful INTEL® microcomputer. Precise control of the MTP's pumping mechanism by the pump's microcomputer provides for accurate and continuous infusion - no bolusing effect. The MTP has a rotational and detachable mounting clamp which enables the pump to be mounted on IV poles, bed rails, wheel chairs, stretchers, and suitable aircraft structures. The pump's rotary peristaltic pumping action enables the clinician to infuse all types of solutions, regardless of viscosity, as well as, whole blood and blood products. MTP Specifications and Features: Size 4"W x 4"H x 7"D , excluding Pole Clamp. Weight 4lbs (without pole clamp) Pump Type Rotary Peristaltic Nominal accuracy +5% volume delivered Continuous - no cycling or bolusing Flow Rates Model 1001 - 0.1 ml/hr to 499.9ml/hr Model 1001a - 1ml/hr to 499ml/hr Infusion Volume Settings Model 1001 - 1 ml to 999ml Model 1001a - 1ml to 9999ml Power Requirements 110-120 VAC, 800mA, 50-60 Hz, 215-220 VAC, 800mA, 40-50 Hz, 12VDC, 800mA Battery Operation Capacity : Up to 8 hours at any flow rate, provided the battery is fully charged before start up. Battery : 6V, rechargeable sealed lead acid, DOT and IATA approved, and UL listed. Other Specifications: UL listed Meets Mil Std. 454(electronic workmanship) Meets RTCA (FAA) DO-160C requirements for aircraft environmental performance standards for altitude, decompression, EMI, RFI, temperature, humidity, and vibration.

For durability and reliable performance in all types of inside or outside environments, the MTP is manufactured utilizing U.S. Military Standards for workmanship and electronic component selection. The MTP's minimal electronic controls (switches) provides quick, simple and user friendly pump set up and operation. Regardless of the operational environment's ambient light, the pump will brightly display all pump modes and alarm messages. The pump will operate for up to 8 hours on its rechargeable battery, and for added operational flexibility, it may be powered (while recharging its battery) from either an AC electrical power source or from a vehicle's DC electrical power source. The DC electrical power source must be 12 volts or greater.

The MTP is registered with the United States Food and Drug Administration (FDA) as a transport infusion pump. This is a plus for your risk management program for your malpractice insurance.

The MTP models (1001) and (1001a) meet U.S. Military Standards 461 (c) and (d) and 810 while under battery operation. The MTP is used by the U.S. Navy in Operation Deep Freeze, and it was also used in Operation Dessert Storm, and both the MTP and MVP-1 were used in Operation Provide Promise in Croatia and Bosnia.

Important Features: 

The MTP will effectively operate in any position, even when it is at the same level as the solution container.

All of the MTP's functions and alarms are controlled by a powerful INTEL® microcomputer.
Precise control of the MTP's pumping mechanism by the pump's microcomputer provides for accurate and continuous infusion - no bolusing effect.
The MTP has a rotational and detachable mounting clamp which enables the pump to be mounted on IV poles, bed rails, wheel chairs, stretchers, and suitable aircraft structures.
The pump's rotary peristaltic pumping action enables the clinician to infuse all types of solutions, regardless of viscosity, as well as, whole blood and blood products.

MTP Specifications and Features: 

Size 4"W x 4"H x 7"D , excluding Pole Clamp.
Weight 4lbs (without pole clamp)
Pump Type Rotary Peristaltic
Nominal accuracy +5% volume delivered Continuous - no cycling or bolusing
Flow Rates Model 1001 - 0.1 ml/hr to 499.9ml/hr
Model 1001a - 1ml/hr to 499ml/hr
Infusion Volume Settings Model 1001 - 1 ml to 999ml
Model 1001a - 1ml to 9999ml
Power Requirements 110-120 VAC, 800mA, 50-60 Hz,

215-220 VAC, 800mA, 40-50 Hz,
12VDC, 800mA
Battery Operation Capacity : Up to 8 hours at any flow rate, provided the battery is fully charged before start up.
Battery : 6V, rechargeable sealed lead acid, DOT and IATA approved, and UL listed.

Other Specifications:

UL listed
Meets Mil Std. 454(electronic workmanship)
Meets RTCA (FAA) DO-160C requirements for aircraft environmental performance standards for altitude, decompression, EMI, RFI, temperature, humidity, and vibration.

Write Your Own Review
You're reviewing:MTP Transport Infusion Pump without case